您好!歡迎訪問上海辰丁自動化設備有限公司網站!
    全國服務咨詢熱線:

    18502123302

    當前位置:首頁 > 技術文章 > 梅索尼蘭Masoneilan定位器8013-255

    梅索尼蘭Masoneilan定位器8013-255

    更新時間:2017-09-12      點擊次數:3932

    梅索尼蘭Masoneilan定位器8013-255

    定位器8013-255是防爆型,定位器8013-257是升級版本,既防風防雨又帶防爆哦


    Cam: Only one cam can be provided, depending on the
    selected lobe, equal-percentage or linear (and linear splitrange)
    control characteristics. Linkage and associated
    backlash problems are essentially eliminated by mounting the
    cam directly to the end of the plug shaft (rotary valves) or the
    actuator stem (reciprocating valves).
    Electrical circuit: The 8013 Series electro-pneumatic
    positioner can be supplied or easily adapted to accommodate
    the DC output signals of nearly all the electric controllers
    presently available. The coil is impregnated with an insulating
    material
    凸輪:只有一個凸輪可以提供根據
    選擇葉,等百分比或線性(和線性splitrange)
    控制的特點。鏈接和相關
    反彈問題本質上是被掛載
    凸輪結束直接塞軸(旋轉閥)或
    執行機構閥桿(往復閥)。
    電路:8013系列電動氣動
    定位器可以提供或容易適應適應
    幾乎所有的直流輸出信號電動controlle
    The primary function of a valve positioner is to ensure that the
    control valve plug position is always proportional to the value of
    the controller output signal, regardless of packing box friction,
    diaphragm actuator hysteresis, or out-of-balance forces on the
    valve plug. The controller output signal may be pneumatic or
    electric, depending on the type of positioner.
    GE’s Masoneilan 8012 and 8013 Series cam positioner is a forcebalance
    electro-pneumatic device which, by directly comparing
    valve position with a controlled DC output signal, provides
    excellent dynamic response and positioning accuracy. One multilobe
    cam provides field-changeable linear- or percentage-control
    characteristics without additional parts.
    閥門定位器的主要功能是確保
    控制閥插頭位置總是成正比的價值
    控制器輸出信號,無論包裝盒子摩擦,
    薄膜執行機構滯后,或不平衡的力量
    閥塞。氣動或控制器的輸出信號
    電,這取決于類型的定位器。
    通用電氣的Masoneilan 8012和8013系列凸輪定位器是一個forcebalance
    電動氣動裝置,通過直接比較
    閥pos
    The 8013 Series electro-pneumatic cam positioner is able:
    ?     To change the valve action (increase in electrical signal opens
    or closes the valve)
    ?     To change control characteristics (linear or equal-percentage)
    ?     To operate each of two control valves (split-range)
    The 8013 Series positioner is available for either direct action
    (increase in electrical signal increases output pressure) or
    reverse action (increase in electrical signal decreases output
    pressure). In addition, the positioner provides an accurate
    means of split-ranging controller output signal for sequential
    operation of two control valves by a single controller
    8013系列電動氣動凸輪定位器可以:
    ?改變閥操作(增加電信號打開
    或關閉閥)
    ?更改控制特征(線性或相同比例)
    ?操作每兩個控制閥(分段)
    8013系列定位器是對直接行動
    (增加電信號輸出壓力增加)或
    扭轉操作(增加電信號減少輸出
    壓力)。此外,定位器提供的
    Housing: The cast aluminum case is mounted at the front
    of the device by means of a mounting plate and a molded
    support.
    Beam and flexure bearings: Beryllium copper flexure bearings
    provide friction-free fulcrum points for the beam.
    Pilot: High-capacity type for fast stroking speeds. The
    metering tube for the nozzle air supply is equipped with a
    clean-out plunger.
    住房:鑄鋁合金外殼安裝在前面
    設備的安裝板和模制的手段
    支持。
    梁和撓曲軸承:鈹銅合金軸承曲
    提供無摩擦梁支點點。
    飛行員:高容量類型撫摸速度快。的
    計量噴嘴供氣管是配備一個
    清洗柱塞。

    上海辰丁自動化設備有限公司
    地址:上海靜安區共和新路4718弄宏慧新匯園10號樓B203
    郵箱:1619087822@qq.com
    傳真:
    關注我們
    歡迎您關注我們的微信公眾號了解更多信息:
    歡迎您關注我們的微信公眾號
    了解更多信息
    主站蜘蛛池模板: 武强县| 麻阳| 阳原县| 彭阳县| 潼南县| 孝义市| 鸡泽县| 江都市| 娱乐| 夏津县| 公主岭市| 工布江达县| 云阳县| 金华市| 泸州市| 镇康县| 繁昌县| 德庆县| 湟中县| 浦江县| 葫芦岛市| 无极县| 南充市| 济源市| 修武县| 宝坻区| 潼关县| 讷河市| 喀什市| 张家港市| 谢通门县| 北川| 木兰县| 太仆寺旗| 绥德县| 育儿| 疏附县| 凤庆县| 都匀市| 上饶县| 吉林市|